raid data recovery reconstructor

Recover Data From A Broken RAID Level 5 or 0 Array


Runtime's raid data recoveryy reconstructor will assist you to recover data from a broken

* RAID Level 5 Array consisting of 3 to 14 drives
* RAID Level 0 Array (Striping) consisting of 2 drives

Even if you are clueless when it comest to the RAID parameters, such as drive order, block size and direction of rotation, raid data recovery reconstructor will test and analyze your fixed disks and determine the correct values. You will then be able to create a copy of the reconstructed RAID in an image file or on a physical disk drive.

Raid data recovery reconstructor is read-only. It will not try to repair your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping".

Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. raid data recovery reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives.

The raid data recovery reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.